URH 125-3S
RIGHT HAND
High-productivity table with multiple spindle options
High-productivity table with multiple spindle options
Cost-Effectiveness
Increased Productivity
Reduced Setup Time
Space Efficiency
Hydraulic clamping adds superior holding force to this 3-spindle system, enabling accurate multi-part machining in one setup. A reliable choice for cost-effective mass production.
DIMENSION | UNITS | URH 125-3S RIGHT HAND | |
---|---|---|---|
Turn Table Diameter | mm | Ø125 | |
Table Centre Height | mm | 110 | |
Turn Table Diameter h7 (without table top) | mm | - | |
Table Height | mm | - | |
Centre Bore Diameter H7 | mm | Ø30 | |
T-Slot Size - Reference Slots H7 | mm | 10 x 2 nos | |
T-Slot Size - Other Slots H8 | mm | 10 x 2 nos | |
T-Slot Size - Other Slots H12 | mm | - | |
Guide Block Width h6 | mm | 14 | |
Through Bore Diameter | mm | Ø20 | |
Swing | mm | Ø140 | |
OPERATIONAL | |||
Servo Motor Torque | Nm | 3 | |
Speed Reduction Ratio | - | 1:90 | |
Table Rotation Speed - (Motor @ 2000rpm) | rpm | - | |
Table Rotation Speed - (Motor @ 4000rpm) | rpm | - | |
Table Rotation Speed - (Motor @ 3000rpm) | rpm | 33.3 | |
Tilting Range | deg | - | |
Table Gyration Angle / Pulse | deg | 0.001° | |
Cooling System | - | ||
LOAD DATA | |||
Load carring capacity | kg | - | |
Load carring capacity - Vertical | kg | 15 | |
Load carring capacity - Horizontal | kg | 30 | |
Load carring capacity - Vertical with Tailstock Support | kg | 30 | |
Max Thrust load capacity - Horizontal | kg | 5000 | |
Max Thrust load capacity - Vertical | kg | 1500 | |
Tilting Moment - Horizontal (F x L) | Nm | 200 | |
Tilting Moment - Vertical (F x L) | Nm | 150 | |
Allowable Work Inertia (%) | kg.m² | 0.2 | |
Max. Driving Torque ($$) | Nm | 50 | |
URH 125-3S RH | URH 125-3S RP | ||
Clamp Torque (Pneumatic @5 Bar) | Nm | - | 60 |
Clamp Torque (Pneumatic @5 Bar) - Tilt Axis | Nm | - | - |
Clamp Torque (Hydraulic @30 Bar) | Nm | 150 | - |
Clamp Torque (Hydraulic @30 Bar) - Tilt Axis | Nm | - | - |
Clamp Torque (Hydraulic @40 Bar) | Nm | - | - |
Clamp Torque (Hydraulic @55 Bar) | Nm | - | - |
Clamp Torque (Hydraulic @60 Bar) | Nm | - | - |
ACCURACY | |||
Indexing Accuracy* | Arc Sec | ±30” | |
Indexing Accuracy* - Tilt Axis | Arc Sec | - | |
Repeatability | Arc Sec | 8” | |
Repeatability - Tilt Axis | Arc Sec | - | |
OVERALL WEIGHT | |||
Net Weight | kg | 100 |
(PDF - 2 MB)